TRAK DPM SX2P

The footprint and feel of a knee mill, but with superior strength and rigidity

360 Test

Move mouse over image for 360 view

Featuring
ProtoTRAK SMX

Like all TRAK Bed Mills, the DPM SX2P features:

  • ProtoTRAK SMX CNC
  • Solid ram moves along the column providing mass for heavy cuts
  • Generous Z-axis CNC travel
  • Strong and rigid
  • Efficient for any job: manual, 2-axis CNC or 3-axis CNC
  • Standard electronic head for programmable spindle speeds and tapping
  • Precision ground ballscrews installed in the table, saddle and column
  • Manual quill with integrated quill and ram encoders
  • Wide way surfaces are hardened and ground, slide ways are Turcite® coated
  • Real handwheels so you can work manually

With these important differences:

  • R8 Spindle taper
  • 3 hp spindle motor

 

  • Table Size - 49" x 9"
  • Travel (X, Y, Z axis) - 31" x 16" x 23.5"
  • Quill Diameter - 3 3/8"
  • Maximum Quill Travel - 5"
  • Spindle Taper - R8
  • Spindle Speed Range - 40-600, 300-5000
  • Spindle Center to Column Face - 18"
  • Spindle Motor Power - 3 HP
  • Power requirements, control - 110V; 1P; 8A
  • Power requirements, machine - 220V;3P; 11A
  • Maximum Weight of Workpiece - 1320 lbs.
  • Height of table from bottom of bed - 33"
  • Max spindle nose to table - 27"
  • Min height - 90"
  • Max height - 98"
  • Width of machine including table - 70"
  • Length with electric box door closed - 64"
  • Overall width incl full table traverse - 104"
  • Overall length with electrical door open - 72"
  • Footprint of Machine - 23" x 40"
  • Weight net / shipping lbs. - 3200 / 3500
  • Rapid traverse X, Y, Z - 150 IPM
  • Auto Lube Pump
  • Precision ground ballscrews in the table, saddle and ram
  • Chrome hardened and ground quill
  • Meehanite castings
  • Slide ways are Turcite coated
  • Wide way surfaces are hardened and ground
  • Drilling max capacity - 1"
  • Milling max capacity - 3 inch3/min
  • Tapping max capacity - 3/4"

 

ProtoTRAK SMX

The ProtoTRAK SMX is a powerful CNC for milling machines that lets
you choose the capability that is right for you.

 

  • Advanced Capability
  • Easy Transition between manual, 2-axis and 3-axis CNC.
  • Always easy to learn and use - even for the most advanced operations

 

See More....

 

 
  • Auxiliary Function (CNC option)
  • Chip Pan / Splash Shield
  • Coolant Pump
  • Glass Scales on table and saddle
  • Halogen Worklamp
  • Limit Switches
  • Networking (CNC option)
  • Power Drawbar
  • Remote Stop/Go switch
  • Spray Coolant
  • Table Guard Enclosure
  • TRAKing / Electronic Handwheels
  • Vise

See all option details for the TRAK Bed Mills

 

Manuals

Manual Name Part Number Version Size
TRAK DPMSX2, SX3 &  SX5 Safety, Installation, Maintenance, Service & Parts List Manual 24317 060311 5.8 MB Download PDF
TRAK DPMSX2, DPMSX3, DPMSX5, FHM5, FHM7 & ProtoTRAK SMX CNC Safety, Programming, Operating, & Care 24495 040811 2.3 MB Download PDF

Software

Title Filename Version Size
ProtoTRAK DXF Converter Option dxf_sx_dxf_301.zip Version 3.01 for SMX, SLX 1.6 MB Download
ProtoTRAK SMX Control current_sx_465_462.zip 4.6.5 1.1 MB Download
ProtoTRAK OFFLINE PT4SXOL offline_sxol_465.zip 4.6.5 (SMX & SLX Controls) 3.5 MB Download
Service & Support
Service Dept

Hours
Phone
Fax
E-Mail

7:00 AM to 4:30 PM PST
800-367-3165
310-886-8029

Parts Support Policy
  • SWI supports all its products for as long as the components are reasonably available.
  • Many electronic components are eligible for exchange. See the service price list.
  • All exchanges and repairs must have an RMA number issued by the SWI Service Department.
  • An evaluation fee of $75 is applied to units sent in for repair. If repair is not authorized, this fee is still charged (even if the unit is exchanged).
  • Both repaired and exchange units have a warranty of 90 days.

Warranty Statement
Service Parts Price List
Toolbox Contents
Site Preparation Guide
Specification Sheets
How to Find Machine's Serial Number
FAQ

Visit BuyTRAK.com to purchase accessories and service parts for your model.

Express Exchange Policy
  • The Express Exchange is an exchange of a failed component for a (usually) rebuilt component that has previously failed and has been repaired, brought up to current revision and subjected to the rigorous testing and QC applied to new units.
  • The Express Exchange provides for the exchange part to be shipped to you before you send in the failed part.
  • The price of the exchange part is a fraction of the cost of a new unit.
  • This low price assumes that the failed part will be returned to us so that we can salvage the parts for future exchange units.
  • There will be no credits issued when you send back the failed part. The credit is built into the price of the exchange.
  • If you do not send the failed part back to us we will send you another invoice for the difference between the Exchange Price and List Price on the part we didn’t receive.