TRAK DPM EX2

Featuring the ProtoTRAK EMX3 CNC.
The footprint and feel of a knee mill, but with superior strength and rigidity.

/images/360/DPMEX2-01.png

Move mouse over image for 360 view

Featuring
ProtoTRAK EMX

Like all TRAK Bed Mills, the DPM EX2 features:

  • Solid ram moves along the column providing mass for heavy cuts
  • Generous Z-axis CNC travel
  • Strong and rigid
  • Manual, 2-axis CNC or 2 1/2-axis CNC
  • Precision ground ballscrews installed in the table, saddle and column
  • Manual quill with integrated quill and ram encoders
  • Wide way surfaces are hardened and ground, slide ways are Turcite® coated
  • Real handwheels so you can work manually

With these important differences:

  • R8 Spindle taper
  • 3 hp spindle motor
  • ProtoTRAK EMX3 CNC
  • Vari-speed head

 

  • Table Size - 49" x 9"
  • Travel (X, Y, Z axis) - 32" x 16" x 23.5"
  • Quill Diameter - 3 3/8"
  • Maximum Quill Travel - 5"
  • Spindle Taper - R8
  • Spindle Speed Range - 60 - 4200 RPM
  • Spindle Center to Column Face - 18"
  • Spindle Motor Power - 3 HP
  • Power requirements, control - 110V; 1P; 10A
  • Power requirements, machine - 220/440V; 3P; 8.5/4.3A
  • Maximum Weight of Workpiece - 1320 lbs.
  • Height of table from bottom of bed - 33"
  • Max spindle nose to table - 27"
  • Min height - 90"
  • Max height - 98"
  • Width of machine including table - 70"
  • Length with electric box door closed - 64"
  • Overall width incl full table traverse - 104"
  • Overall length with electrical door open - 72"
  • Footprint of Machine - 23" x 40"
  • Weight net / shipping lbs. - 3200 / 3500
  • Rapid traverse X, Y, Z - 100 IPM
  • Auto Lube Pump
  • Precision ground ballscrews in the table, saddle and ram
  • Chrome hardened and ground quill
  • Meehanite castings
  • Slide ways are Turcite coated
  • Wide way surfaces are hardened and ground
  • Drilling max capacity - 1"
  • Milling max capacity - 3 inch3/min
  • Tapping max capacity - 3/4 - 10"

 

ProtoTRAK EMX3

The ProtoTRAK EMX3 is an easy-to-use CNC that is perfect for low quantity parts.

 

  • Essential CNC functions
  • 2-axis contouring
  • 2 1/2 axis machining
  • Ideal for shops where production is limited or several people share the machine

 

See More....

 

 
  • Chip Pan / Splash Shield
  • Coolant Pump
  • Halogen Worklamp
  • Power Drawbar
  • Remote Stop/Go Switch
  • Spray Coolant
  • Table Guard Enclosure
  • Vise

 

Manuals

Manual Name Part Number Version Size
ProtoTRAK EMX Offline Programming Manual 26065 062008 233 KB Download PDF
TRAK EMX Knee Mills & DPMEX2 Bed Mill EMX CNC Retrofit Safety, Programming, Operating & Care Manual 26056 012312 2.18 MB Download PDF
TRAK EMX Knee/Bed Mills, ProtoTRAK EMX CNC Safety, Installation, Maintenance, Service & Parts Lists 26109 100713 5.23 MB Download PDF

Software

Title Filename Version Size
ProtoTRAK EMX3 Control emx3_40.zip 4.0 949 KB Download
ProtoTRAK EMX and ELX Offline Software offline_exol_40.zip Version 4.0 1.51 MB Download
Service & Support
Service Dept

Hours
Phone
Fax
E-Mail

7:00 AM to 4:30 PM PST
800-367-3165
310-886-8029

Parts Support Policy
  • SWI supports all its products for as long as the components are reasonably available.
  • Many electronic components are eligible for exchange. See the service price list.
  • All exchanges and repairs must have an RMA number issued by the SWI Service Department.
  • An evaluation fee of $75 is applied to units sent in for repair. If repair is not authorized, this fee is still charged (even if the unit is exchanged).
  • Both repaired and exchange units have a warranty of 90 days.

Visit BuyTRAK.com to purchase accessories and service parts for your model.

Express Exchange Policy
  • The Express Exchange is an exchange of a failed component for a (usually) rebuilt component that has previously failed and has been repaired, brought up to current revision and subjected to the rigorous testing and QC applied to new units.
  • The Express Exchange provides for the exchange part to be shipped to you before you send in the failed part.
  • The price of the exchange part is a fraction of the cost of a new unit.
  • This low price assumes that the failed part will be returned to us so that we can salvage the parts for future exchange units.
  • There will be no credits issued when you send back the failed part. The credit is built into the price of the exchange.
  • If you do not send the failed part back to us we will send you another invoice for the difference between the Exchange Price and List Price on the part we didn’t receive.