TRAK Sensor
|
We recommend that you
bookmark this page for convenient access in the future.
TRAK Sensor Replacement Guide:
Use the guide below to order the model of TRAK
Sensor currently supplied for your application.
Note: the “R” on the end of the model number
stands for “Replacement”. That means the original TRAK Sensor was exchanged for
this one. “R” units are also eligible for exchange.
Please note the following about exchange (“R”)
units:
 |
The M5 Base is
not included with an R unit.
|
|
R units come with
a 90-day warranty.
|
A new TRAK Sensor comes with an M5 Base and
a one-year warranty.
|
Your Model
|
Status
|
Replace With |
Comments
|
| E100B or E100BR
|
Non-current |
E100DR |
Regular resolution |
| E200B or E200BR |
Non-current |
E200DR |
Lathe cross slide |
| E100D or E100DR |
Current |
E100DR |
|
| E200D or E200DR
|
Current |
E200DR |
|
| M125B or M125BR
|
Non-current |
M125C |
|
| M250B or M250BR |
Non-current |
M250C |
|
| M500B or M500BR |
Non-current |
M500C
|
|
| M125C or M125CR |
Current |
M125C or M125CR
|
|
| M250C or M250CR |
Current |
M250C or M250CR |
|
| M500C or M500CR |
Current |
M500C or M500CR
|
|
|
|
|
|
| E50-60 DTAD |
Non-current |
E100D |
Lose analog readout |
| E100-60 DTAD |
Non-current |
E200D |
Lose analog readout |
| M50-75 DTAD |
Non-current |
M125C |
Lose analog readout |
| M100-75 DTAD |
Non-current |
M250C |
Lose analog readout |
| M200-75 DTAD |
Non-current |
M500C |
Lose analog readout |
| E250-60 DTAD |
Non-current |
|
|
| E254-60 DTAD |
Non-current |
|
|
| 10A DTAD |
Non-current |
|
|
| 10B DTAD |
Non-current |
|
|
| 10C DTAD |
Non-current |
|
|
| 10D DTAD |
Non-current |
|
|
If this is not your Model, please
Click Here
to return to the Models listing.
Service Department
800-367-3165
Hours 7:00 AM to 4:30 PM PST Mon - Fri.
Please have your model and serial numbers ready when you call.
|
|
Links: |
|
|
Support Policy |
-
SWI supports
all its products for as long as the components are reasonably available.
-
Use the "Replace With"
column above determine the model of the replacement unit.
-
All exchanges
and repairs must have an RMA number issued by the SWI Service Department.
-
An evaluation
fee of $75 is applied to units sent in for repair. If repair is not
authorized, this fee is still charged (even if the unit is exchanged).
-
Both repaired
and exchange units have a warranty of 90 days.
-
Exchange units do not
come with an M5 Base.
|
|
Express Exchange Policy |
-
The Express
Exchange is an exchange of a failed component for a (usually) rebuilt
component that has previously failed and has been repaired, brought up to
current revision and subjected to the rigorous testing and QC applied to new
units.
-
The Express
Exchange provides for the exchange part to be shipped to you before you send
in the failed part.
-
The price of
the exchange part is a fraction of the cost of a new unit.
-
This low
price assumes that the failed part will be returned to us so that we can
salvage the parts for future exchange units.
-
If you do not
send the failed part back to us we will send you another invoice for the
difference between the Exchange Price and List Price on the part we didn’t receive.
|
