|
The ProtoTRAK EMX |
|
|
The ProtoTRAK EMX is great
for first-time CNC users or for basic knee
mill work. Essential features – minimal complexity.The ProtoTRAK EMX has the features you really need to work productively using a knee mill, but leaves out features that make other CNCs more complicated. |
 |
DRO RoutinesThe most useful features of a DRO are available in a crisp, clear display. While working manually in the DRO mode, let the servomotors do the most of the work by pressing the Power Feed and Jog buttons. When you need manual control ball screws provide smooth, positive control while hand cranking. ProgrammingProgram the ProtoTRAK EMX by making simple selections and answering prompts in plain English. Unlike conventional CNCs, you define only the part geometry; the ProtoTRAK EMX defines the tool path for you. Program StorageHandling programs is easy with the simple, clear choices of the ProtoTRAK EMX. An internal flash drive lets you save hundreds of typical programs. A USB port is available to plug in a storage device for backing up programs and moving programs between ProtoTRAKs. The optional USB thumb drive is convenient to use and comes configured to work with the ProtoTRAK EMX. Part GraphicsWhile programming, simply press the LOOK
key for color graphics of what you have
programmed so far. Learning the ProtoTRAK EMXEven if you have never used a CNC before,
you can learn the ProtoTRAK EMX in a couple
of hours. From the first day you own it, you
will find it is easier to make parts with a
ProtoTRAK EMX than it is to use manual
methods and use a DRO. Go home less tired
one day, and you’ll take to the ProtoTRAK
just like the scores of machinist have for
over twenty years. ProtoTRAK EMX Specifications
|
|
