TRAK DPM SX Series Bed Mills
|
- Now with optional TRAKing!
Great value.
Easy to learn and use.
Strong and rigid.
Use as a manual machine, two- or three
axis CNC.
Mechanical vari-speed head / optional
inverter-duty head available.
Mechanical handwheels / optional
electronic handwheels available.
|
 |
TRAK DPM SX2
- 3 HP
- Table: 49" x 9"
- Travel: 32" x 16" x
27"
- Spindle taper: R8
-
RPM: 70 to 4200 vari-speed
head
|
|
TRAK DPM SX3
(pictured above)
- 5 HP
- Table: 50" x 10"
- Travel: 31" x 17" x 23.5"
- Spindle taper: NMTB
40
- RPM: 70 to 3950
vari-speed head
|
|
TRAK DPM SX5
- 5 HP
- Table: 50" x 12"
- Travel :40" x 20" x 23.5"
- Spindle taper:
NMTB 40
- RPM: 70
to 3950 vari-speed
head
- Electronic
Handwheels only,
mechanical
handwheels not
available
|
|
DPM SX2 Machine Specifications
- Table Size - 49" x 9"
- Travel (X, Y, Z axis) - 32 x 16
x 27
- Quill Diameter - 3 3/8"
-
Maximum Quill Travel - 5"
- Spindle
Taper - R8
- Spindle Speed Range RPM -
Varispeed drive - 70-4200
- Spindle
Speed Range with E Head Option - 40-600,
300-5000
- Spindle Center to Column
Face - 18"
- Spindle Motor Power - vari-speed
head - 3 HP
- Spindle Motor Power -
Optional E head - 3 HP
- Power
requirements, control - 110V; 1P; 8A
-
Power requirements, machine with vari-speed
head - 220/440;3P; 8.5/4.25A
- Power
requirements, machine with Optional E
head - 220V;3P; 11A
- Maximum Weight of
Workpiece - 1320 lbs.
- Height of table
from bottom of bed - 33"
- Max spindle
nose to table - 27"
- Min height - 90"
-
Max height - 98"
- Width of machine
including table - 70"
- Length with
electric box door closed - 64"
-
Overall width incl full table traverse -
104"
- Overall length with electrical
door open - 72"
- Footprint of Machine
- 23 x 40"
- Weight net / shipping lbs.
- 3200 / 3500
- Rapid traverse X, Y, Z
- 150 IPM
- Auto Lube Pump
- Precision ground
ballscrews in the table, saddle and ram
-
Chrome hardened and ground quill
-
Meehanite castings
- Slide ways are
Turcite coated
- Wide way surfaces are
hardened and ground
- Drilling max
capacity, Varispeed head- 1" dia
-
Milling max capacity, Varispeed head - 2
inch3/min
- Tapping max capacity,
Varispeed head - .75"
- Drilling max
capacity, Optional E head - 1"
-
Milling max capacity, Optional E head -
3 inch3/min
- Tapping max capacity,
Optional E head - 3 /4
DPM SX3 Machine Specifications
- Table Size - 50" x 10"
- Travel (X, Y, Z axis) - 31 x 17
x 23.5"
- Quill Diameter - 3 15/16"
-
Maximum Quill Travel - 5"
- Spindle
Taper - NMTB 40
- Spindle Speed Range
RPM - Varispeed drive - 70-3950
-
Spindle Speed Range with E Head Option -
40-600, 300-5000
- Spindle Center to
Column Face - 19"
- Spindle Motor Power
- vari-speed head - 5 HP
- Spindle
Motor Power - Optional E head - 5 HP
-
Power requirements, control - 110V; 1P;
8A
- Power requirements, machine with
vari-speed head - 220/440V;3P; 14/7A
-
Power requirements, machine with
Optional E head - 220V;3P; 17A
-
Maximum Weight of Workpiece - 1320 lbs.
-
Height of table from bottom of bed - 38"
-
Max spindle nose to table - 23.5"
- Min
height - 85"
- Max height - 95"
-
Width of machine including table - 73"
-
Length with electric box door closed -
66"
- Overall width incl full table
traverse - 108"
- Overall length with
electrical door open - 76"
- Footprint
of Machine - 24" x 44"
- Weight net /
shipping lbs. - 4100 / 4400
- Rapid
traverse X, Y, Z - 150 IPM
- Auto Lube Pump
- Precision ground
ballscrews in the table, saddle and ram
-
Chrome hardened and ground quill
-
Meehanite castings
- Slide ways are
Turcite coated
- Wide way surfaces are
hardened and ground
- Drilling max
capacity, Varispeed head- 1" dia
-
Milling max capacity, Varispeed head - 5
inch3/min
- Tapping max capacity,
Varispeed head - 1"
- Drilling max
capacity, Optional E head - 1"
-
Milling max capacity, Optional E head -
5 inch3/min
- Tapping max capacity,
Optional E head - 1"
TRAK DPM SX5 Machine Specifications
- Table Size - 50" x 12"
- Travel (X, Y, Z axis) - 40 x 20
x 23.5"
- Quill Diameter - 3 15/16"
-
Maximum Quill Travel - 5"
- Spindle
Taper - NMTB 40
- Spindle Speed Range
RPM - Varispeed drive - 70-3950
-
Spindle Speed Range with E Head Option -
40-600, 300-5000
- Spindle Center to
Column Face - 20"
- Spindle Motor Power
- vari-speed head - 5 HP
- Spindle
Motor Power - Optional E head - 5 HP
-
Power requirements, control - 110V; 1P;
8A
- Power requirements, machine with
vari-speed head - 220/440V;3P; 14/7A
-
Power requirements, machine with
Optional E head - 220V;3P; 17A
-
Maximum Weight of Workpiece - 1760 lbs.
-
Height of table from bottom of bed - 41"
-
Max spindle nose to table - 23.5"
- Min
height - 87"
- Max height - 98"
-
Width of machine including table - 94"
-
Length with electric box door closed -
71"
- Overall width incl full table
traverse - 136"
- Overall length with
electrical door open - 81"
- Footprint
of Machine - 24" x 48.4"
- Weight net /
shipping lbs. - 4400 / 4600
- Rapid
traverse X, Y, Z - 150 IPM
- Auto Lube Pump
- Precision ground
ballscrews in the table, saddle and ram
-
Chrome hardened and ground quill
-
Meehanite castings
- Slide ways are
Turcite coated
- Wide way surfaces are
hardened and ground
- Drilling max
capacity, Varispeed head- 1" dia
-
Milling max capacity, Varispeed head - 5
inch3/min
- Tapping max capacity,
Varispeed head - 1"
- Drilling max
capacity, Optional E head - 1" dia.
-
Milling max capacity, Optional E head -
5 inch3/min
- Tapping max capacity,
Optional E head - 1"
- Advanced Features
- Auxiliary
Function
- Chip Pan /
Splash Shield
- Coolant Pump
- Glass
Scales on table and saddle
- Halogen
Worklamp
- Limit Switches
-
Networking/Memory
- Power Drawbar
-
Programmable Electronic Head
- Remote
Stop/Go switch
- Spray Coolant
- Table
Guard Enclosure
- TRAKing / Electronic Handwheels
(Standard on the DPM SX5)
-
Vise
|
|
|
