TRAK FHM Bed Mills
|
- Solid ram moves up and down for Z-axis operation, providing mass behind heavy cuts.
- Rapids up to 250 IPM.
- Tapping.
- Electronic handwheels for manual operation and TRAKing.
- Operate the ProtoTRAK SMX CNC manually, two-axis CNC or three-axis CNC.
- Wide way surfaces are hardened and ground. Slide ways are Turcite coated.
- Real Mehanite castings.
- Precision ground ballscrews in the table, saddle and column.
- Inverter-duty spindle motor.
|
|
TRAK FHM5
- 5 HP
- Table: 50" x 12"
- Travel: 40" x 20" x
24"
- RPM 160 4000
- 4400 lbs.
|
|
TRAK FHM7 (pictured above)
- 7.5 HP
- Table:
76" x 14"
- Travel:
60" x 23" x 20.5"
-
RPM: 200 to 5000
-
7650 lbs.
|
|
TRAK FHM5 Machine Specifications
- Table size - 50" x 12"
- T-slots
(number x width x pitch) - 3 x16mm x
63.5mm
- Travel (X, Y, Z axis) - 40" x
20" x 24"
- Quill diameter - 4.13"
-
Spindle taper - NMTB 40
- Spindle speed
range RPM - 160-4000
- Spindle center
to column face - 20.5"
- Spindle motor
power - 5 HP
- Power requirement,
control - 110V, 1P, 15A
- Power requirement,
machine - 220V, 3P, 60HZ
- Current,
Full Load Amps - 17.5 FLA
- Maximum weight
of workpiece - 1760 lbs.
- Height of
table from bottom of bed - 41"
-
Maximum spindle nose to table - 24"
-
Minimum height - 87"
- Maximum height -
100"
- Width of machine including table
- 94"
- Length with electric box door
closed - 80"
- Overall width including
full table travel - 136"
- Overall
length with electrical door open - 105"
-
Footprint - 24" x 48.4"
- Way surface -
dovetail X axis; square ways Y and Z
axis
- Weight (approximate) net - 4400
lbs.
- Weight (approximate) shipping -
4700 lbs.
- Drill max capacity - 1" dia.
-
Tapping max capacity - 5/8"
- Milling
max capacity - 5
inch3/min
- Way surfaces hardened and
ground
- Turcite coating on all slide
ways
- Automatic lubrication pump
-
Auxiliary functions
- Limit switches
-
TRAKing/Electronic Handwheels
TRAK FHM7 Machine Specifications
- Table size - 76" x 14"
- T-slots
(number x width x pitch) - 4 x 16mm x
63.5mm
- Travel (X, Y, Z axis) - 60" x
23" x 20.5"
- Quill diameter - 5.06"
-
Spindle taper - NMTB 40
- Spindle speed
range RPM - 200-5000
- Spindle center
to column face - 23"
- Spindle motor
power - 7.5 HP
- Power requirement,
control - 110V, 1P, 15A
- Power
requirement, machine - 220V, 3P, 60HZ
-
Current, Full Load Amps - 37.5 FLA
-
Maximum weight of workpiece - 2200 lbs.
-
Height of table from bottom of bed -
38.25"
- Maximum spindle nose to table
- 21.5"
- Minimum height - 95.5"
-
Maximum height - 101"
- Width of
machine including table - 110.5"
-
Length with electric box door closed -
93.75"
- Overall width including full
table travel - 171.65"
- Overall length
with electrical door open - 119.5"
-
Footprint - 37" x 62.2"
- Way surface -
dovetail X axis; square ways Y and Z
axis
- Weight (approximate) net - 7650
lbs.
- Weight (approximate) shipping -
7975 lbs.
- Drilling max capacity - 1"
dia.
- Tapping max capacity - 5/8"
- Milling
max capacity - 7
inch3/min
- Way surfaces hardened and
ground
- Turcite coating on all slide
ways
- Automatic lubrication pump
-
Auxiliary function hardware
- Limit
switches
- TRAKing/Electric Handwheels
Options
- Chip pan / Splash shield
- Converters
- Coolant pump
- Glass
scales for table and saddle
- Halogen work lamp
- Offline
programming software
- Power drawbar
-
Remote stop/go switch
- Spray coolant
-
Tableguard
|
|
|
