TRAK Knee Mills with ProtoTRAK SMX

Featuring the ProtoTRAK SMX CNC

Two- and three-axis CNC models available.
Advanced CNC operation that is easy to learn and use.
Real handwheels for working manually.
Optional TRAKing for control of your CNC program run.
Optional Programmable Electronic Head.

---

TRAK K2SX table size: 49" x 9" travels: 33" x 12" 3 HP spindle R8 spindle taper 2200 lbs. net weight

---

TRAK K2SX Machine Specifications

• Table Size -49" X 9"
• T-Slots - 5/8" x 3 x 2 ½"
• Table Travel - 33"
• Saddle Travel - 12"
• Knee Travel - 16"
• Ram Travel - 12"
• Maximum Quill Travel - 5"
• Quill Diameter - 3 3/8"
• Spindle Taper - R8
• Spindle Speed Vari-speed head - 60-4200 RPM
• Spindle Speed Optional E-head - 40-600 and 300-5000 RPM
• Head Tilt - 45 deg. forward, 45 deg. back, 90 deg. left, 90 deg. right
• Spindle Motor Power, Vari-speed head - 3HP
• Spindle Motor Power, Optional E head - 3HP
• Power Requirement Control - 110V; 1P; 10A
• Power requirements, machine with vari-speed head - 220/440V;3P; 8.5/4.25A
• Power requirements, machine with Optional E head - 220V;3P; 11A
• Maximum Weight on Table - 750 lbs.
• Machine Weight - 2200 lbs.
• Machine dims l, w, h - 70" x 57" x 83"
• Maximum rapid feed - 100 IPM
• Way surface type - Dovetail X, Y, Z
• Precision 7207 CP4 spindle bearings
• Chrome hardened and ground quill
• Meehanite castings
• Slide ways are Turcite coated
• Wide way surfaces are hardened and ground

TRAK K3SX Machine Specifications

• Table Size -50" X 10"
• T-Slots - 5/8" x 3 x 2 ½"
• Table Travel - 32"
• Saddle Travel - 16"
• Knee Travel - 16"
• Ram Travel - 15"
• Maximum Quill Travel - 5"
• Quill Diameter - 3 3/8"
• Spindle Taper - R8
• Spindle Speed Vari-speed head - 60-4200 RPM
• Spindle Speed Optional E-head - 40-600 and 300-5000 RPM
• Head Tilt - 45 deg. forward, 45 deg. back, 90 deg. left, 90 deg. right
• Spindle Motor Power, Vari-speed head - 3HP
• Spindle Motor Power, Optional E head - 3HP
• Power Requirement Control - 110V; 1P; 10A
• Power requirements, machine with vari-speed head - 220/440V;3P; 8.5/4.25A
• Power requirements, machine with Optional E head - 220V;3P; 11A
• Maximum Weight on Table - 850 lbs.
• Machine Weight - 2816 lbs.
• Machine dims l,w,h, - 71" x 59" x 84"
• Maximum rapid feed - 100 IPM
• Way surface type - Dovetail X, Z Square Y
• Precision 7207 CP4 spindle bearings
• Chrome hardened and ground quill
• Meehanite castings
• Slide ways are Turcite coated
• Wide way surfaces are hardened and ground

TRAK K4SX Machine Specifications

• Table Size -50" X 10"
• T-Slots - 5/8" x 3 x 2 ½"
• Table Travel - 32"
• Saddle Travel - 16 ½"
• Knee Travel - 16 ½"
• Ram Travel - 19"
• Maximum Quill Travel - 5"
• Quill Diameter - 3 15/16"
• Spindle Taper - NMTB 40
• Spindle Speed Range - 70-3950 RPM
• Spindle Speed Optional E-head - 40-600 and 300-5000 RPM
• Head Tilt -90 deg. left, 90 deg. right
• Spindle Motor Power, Vari-speed head - 5HP
• Spindle Motor Power, Optional E head - 5HP
• Power Requirement Control - 110V; 1P; 10A
• Power requirements, machine with vari-speed head - 220/440V;3P; 14/7A
• Power requirements, machine with Optional E head - 220V;3P; 17.5A
• Maximum Weight on Table - 850 lbs.
• Machine Weight -3630 lbs.
• Machine dims l, w, h - 71" x 59" x 9"
• Maximum rapid feed - 100 IPM
• Way surface type - Dovetail X, Square Y, Z
• Precision 7207 CP4 spindle bearings
• Chrome hardened and ground quill
• Meehanite castings
• Slide ways are Turcite coated
• Wide way surfaces are hardened and ground

TRAK Knee Mills Options and Accessories

• Programmable Electronic Head
• Glass Scales on table and saddle
• Electronic Handwheels
• Remote Stop/Go switch
• Power Drawbar
• Halogen Worklamp
• Chip Pan
• Riser Block
• Knee Power Feed
• Coolant Pump
• Auto Lube Pump
• Spray Coolant
• Table Guard Enclosure
• Limit Switches
• Vise