 | Height of Centers - 9" |
| Distance between centers - 40 1/4" |
| Swing over bed -18 1 / 2" |
| Swing over saddle wings -17" |
| Swing over cross Slide - 9" |
| Cross slide travel - 13" |
| Tool section max - 1" |
| Coolant tank capacity - 13 gal. |
| Width of Bed - 14 1/ 2" |
| Height of Bed - 13 3 /8" |
| Spindle Nose (Camlock) - D1-6 |
| Spindle through hole - 2.36" |
| Spindle taper - MT#6 |
| Taper in reduction sleeve - MT#4 |
| Spindle dia at front bearing - 3.35" |
| Number of bearings - 3 |
| Bearing class (radial round)- P5 |
| Spindle speed range (RPM)- 80-850, 250-2500 |
| Tailstock Quill travel - 7 1 /8"
- Quill diameter - 2.96"
- Quill taper hole - MT#5 |
| Spindle Motor HP - 10 |
| Power requirements, control - 110V; 1P; 8 A |
| Power requirements, machine - 220V;3P;60Hz |
| Amps full load current - 33 |
| Dimensions net - 91 x 53 x 70" |
| Dimensions shipping - 97 x 58 x 72" |
| Weight net - 4,500 lbs. |
| Weight shipping - 5,170 lbs. |
| Maximum rapid feed X - 100 |
| Maximum rapid feed Z - 150 |
| Coolant pump motor - 1/8 HP |
| Spindle motor brake - Dynamic braking |
| Way surface hardness - 400 - 450 HB |
| Head stock lubrication - Oil bath |
| Meehanite cast monolithic base |
| Heavy ribbed base construction |
| Bedways hardened and ground |
| Sliding surfaces Turcite coated |
| Dovetails on cross slide, V-ways on saddle |
| Adjustable saddle gibs |
