 | Height of Centers- 12" |
| Distance between centers- 60" |
| Swing over bed - 24" |
| Swing over saddle wings - 24" |
| Swing over cross slide - 14.5" |
| Cross slide travel - 12.5" |
| Tool section max - 1" |
| Coolant - 11 gal. |
| Bed Width - 15.75" |
| Bed Height - 12 5/8" |
| Spindle Nose - D1-8 |
| Spindle through hole - 4.09" |
| Spindle Taper - MT #8 |
| Taper in reduction sleeve - MT #5 |
| Spindle diameter front bearing - 5.51" |
| High-speed angular contact bearings |
| Number of bearings - 2 |
| Bearing Class (Radial Runout) - P5 |
| Number of Spindle Speed Ranges - 2 |
| Spindle Speed Range (RPM) - 40-670, 100-1800 |
| Spindle HP - 15 |
| Power requirements, control - 110V; 1P; 15 A |
| Power requirements, machine - 220V;3P;60Hz |
| Amps Full Load Current - 45 |
| Dimensions net LxWxH 112x52x62" |
| Dimensions ship LxWxH - 117x59x77" |
| Weight net - 7300 lbs. |
| Weight ship - 8000 lbs. |
| 2 speed tailstock quill |
| Tail stock quill travel - 6.88" |
| Quill diameter - 3" |
| Quill taper hole - MT#5 |
| Coolant pump motor - 1/8 HP |
| Dynamic spindle motor brake |
| Way surface hardness - 400-450 HB |
| Quiet operation |
| Dual sliding doors to control chips and coolant with one door
removable |
| Meehanite cast monolithic base |
| Heavy ribbed base construction |
| Bedways hardened and ground |
| Sliding surfaces Turcite coated |
| Dovetails on cross slide, V-ways on saddle |
| Adjustable saddle gibs |
| Maximum rapid X, Z - 100, 250 ipm |
