Options for TRAK SX and EX Lathes
TRAK SX Series Lathes, Models TRL 1630SX, 1630HSSX, 1840SX
and 2460SX
TRAK EX Lathe Model TRL 1440EX
|
RSG - the Remote Stop/Go Switch
Our most popular accessory. A convenient hand-held
switch to start and stop the CNC servos during program run.
|
Work Lamp
The optional work lamp is a 110 volt, 15 watt
fluorescent light. The 18" light tube is mounted to the top of the
splash shield just to the right of the spindle. The light is protected
by a watertight polycarbonate tube that is sealed by an o-ring. A steel
shield prevents damage from large flying objects and stainless steel
armoring protects the electrical cable.
Available for current TRAK SX Lathes and as a retrofit for prior TRAK and Sport models 1440P and 1745P.
|
Chuck
|
Direct-mounting chuck features separate top
jaws and master jaws. The chuck is rated for the top RPM of the lathe.
| Lathe Model |
Size |
Chuck Through-hole |
Spindle |
| 1440EX |
6" |
1.57" |
D1-4 |
| 1630SX |
8" |
1.969 |
D1-6 |
| 1630HSSX |
6" |
1.77" |
A2-4 |
| 1840SX |
8" |
1.969" |
D1-6 |
| 2460SX |
12" |
3.937" |
D1-8 |
|
|
Collet Closer
|
Lathe Model |
Type |
|
1440EX |
5C Taper Mount, Extended
Nosepiece |
|
1630SX |
5C Taper Mount, Extended
Nosepiece |
|
1630HSSX |
5C Taper Mount, Extended
Nosepiece |
|
1840SX |
5C Taper Mount, Extended
Nosepiece |
|
Tooling Kit
|
Dorian brand tooling kit. Contains a tool post and
a variety tool holders. The tool post has a release mechanism for
quick, easy tool changes. It is repeatable within .001".
| Lathe Model |
Tooling |
| 1440EX |
3/4" |
| 1630SX |
3/4" |
| 1630HSSX |
3/4" |
| 1840SX |
3/4" or 1" |
| 2460SX |
1" |
The tooling kit includes:
- a quick-change tool post
- 4 each 3/4" or 1" square tool holders for turning, facing and
boring
- 1 each #4 Morse taper drill holders
- 1 each boring tool holder
- 3/4" Tooling - Boring dia 1.000"
- 1" Tooling - Boring dia 1.250"
|
|
Faceplate
|
300mm, slotted. Mounted by the D-1 camlock.
| Lathe Model |
Diameter |
|
1440EX |
10" |
| 1630SX |
12" |
| 1840SX |
12" |
| 2460SX |
22" |
|
|
Follow rest
|
Solid brass nib type.
| Lathe Model |
Max Workpiece Dia. |
|
1440EX |
1.97" |
| 1630SX |
5" |
| 1630HSSX |
5" |
| 1840SX |
5" |
|
|
Follow rest
|
Model 2460SX only.
Solid brass nib type. Maximum workpiece diameter is 6.5".
|
|
Steady rest
 |
| Model |
Diameter (inches) |
Type |
| 1440EX |
.20 to 2.36 |
Roller |
| 1630SX |
.500 to 5.5 |
Roller |
| 1630HSSX |
.500 to 5.5 |
Roller |
| 1840SX |
.750 to 6 |
Roller |
| 2460SX |
1.5 to 8.00 |
Roller |
|
|
Gang Tooling
 |
Model 1840SX only.
Note:This option provides for the hardware only. Gang tooling
operation is enabled with the Advanced Features Option.
Includes:
6 each riser blocks
1 double facing tool block
2 single facing tool block
1 side tool holder
3 boring bar holders
|
|
Star 4-Position Indexer.
|
Integrated into the ProtoTRAK SLX CNC. Four
stations that index with the control command.
| Lathe Model |
Tooling |
| 1630SX |
3/4" |
| 1630HSSX |
3/4" |
| 1840SX |
3/4" or 1" |
| 2460SX |
1" |
|
|
Dorian 8_Position Indexer
|
Dorian brand, model Smart-Dex 20 or 25 installed
and integrated into the machine. Eight stations, coolant supplied at
each tool.
| Lathe Model |
Tooling |
| 1630SX |
3/4" |
| 1630HSSX |
3/4" |
| 1840SX |
3/4" or 1" |
| 2460SX |
1" |
|
|
Tailstock
 |
Optional for the 1630SX and 1630HSSX, standard on the
other models.
|
|
Advanced Features Option
Advanced programming and operation for the
ProtoTRAK SLX CNC, included Constant Surface Speed programming. See the
specifications under the ProtoTRAK SLX CNC for a detailed listing of
features.
|
Coolant Pump
Mounted into the machine bed and plugged into the
electrical cabinet. May be configured to operate by the Accessory key on
the ProtoTRAK SLX front panel. 1440EX coolant pump turned on and off by
switch on the apron.
|
TRAKingTM Option
Since 1986, ProtoTRAK has brought an extraordinary
level of productivity to small lot machining. When we tell you that
TRAKing is the coolest thing ever made for tool room applications, you
should believe that you owe it to yourself to get a live demo. The
power of TRAKing is that you no longer have to choose between the
efficiency of CNC and the security of manual control - TRAKing gives you both. With
TRAKing, you don't have to go through the process of proving out the
CNC program before you dare to press the Go button. You can run the
CNC program at the speed at which you crank the handwheel. Go fast, go
slow, stop and take a measurement, go backwards, whatever. You are in
complete control as the machine moves the saddle and cross slide
through the programmed coordinates.
TRAKing is an exclusive feature to ProtoTRAK. Anyone else who says
they have it may not be lying, but they don't know what they are
talking about.
Slam your productivity into high gear with TRAKing. Do yourself a
favor and get a demo of this powerful feature.
Not available for the 1440EX.
|
DXF File converter
|
The powerful DXF File Converter enables you to
translate CAD-generated data into ProtoTRAK programs right at your
machine.
|
|
Networking/Memory Option
The Networking/Memory Option enhances the file
storage and file sharing capability of the ProtoTRAK SLX. See the
specifications under the ProtoTRAK SLX CNC for a detailed listing of
features.
|
|
