Request Demo | Español
 

PA 910

Category: PA

Material Information

Name: PA 910
Source: Plural AM & Airwolf 3D
Description:

Nylon PA910 is one of the strongest materials available for 3D printing. It is a material with very high tensile and sufficient elongation to maintain a high degree of durability. It has become a trusted additive material for top aerospace and automotive companies globally.
Documentation:
  • Technical Data Sheet (TDS)
  • 3ntr Printing Guide
  • Airwolf Printing Guide
    • Related Info:
  • Case Study: SOUTHERN CHAMPION TRAY https://pluralam.com/case-study-southern-champion-tray/
  • KISSlicer Installation - How to Guide https://trakmtsupport.dozuki.com/Guide/3D+Printing+-+How+to+Download+Install+&+Register+for+the+KISSlicer+Slicing+Software/135?lang=en
  • Apex Installation - How to Guide https://trakmtsupport.dozuki.com/Guide/3D+Printing+-+How+to+Download+Install+&+Register+for+APEX+3D-Printing+Software/129?lang=en

    • Printer Compatibility:

    3ntr

    Airwolf
    PA 910 - Natural - Gear
    PA 910 - Black - Brackets

    Purchase Options

    Company Available Colors
    PluralAM.com
    Trusted TRAK Partner
    		 Buy Now Black, Natural
    Airwolf3D.com
    Trusted TRAK Partner
    		 Buy Now Black, Natural

    Mechanical Properties

    Property Standard Value Unit
    Ultimate Tensile Strength ASTM D638 53.4 MPa
    Tensile Modulus ASTM D638 502 MPa
    Elongation at Break ASTM D638 32 %

    Thermal Properties

    Property Standard Value Unit
    HDT @ 0.45 MPa DSC 140 °C

    Physical Properties

    Property Standard Value Unit
    Density 1.08 g/cm³

    Print Settings

    Subject 3ntr Airwolf
    Extruder Temperature
    • 255°C
    • 265°C
    Bed Temperature
    • Temperature based on N1 support raft temperature.
    • 70°C
    Bed Preparation
    • Clean with isopropyl alcohol before and after each print.
    • WolfBite Nitro
    Cooling Fan
    • No
    • Yes
    Closed Chamber
    • Yes
    • Yes
    Heated Chamber
    • Yes
    • Yes
    Chamber Temperature
    • 70°C
    • Default

    Material Management

    Subject 3ntr Airwolf
    Drying

    Temperature

    • 70°C

    Dry Time

    • Heat Only → 12 hours
    • Heat + Vacuum → 3 hours
    • Not available
    Recommended Support Material
    • N1
    • Not available
    Storage
    • Highly hygroscopic; store in a dry place with desiccant.
    • Store in dry place
    Compatible Materials

    -

    -

    Slicer Settings

    Parameter KISSlicer (0.4mm) APEX
    Material Profile Name Alloy 910 – Black, Alloy 910 910 Nylon
    - 0.5 mm
    Layer Height 0.2 mm 0.2 mm
    Loops 4.5 0.6
    Skin 2 1 mm
    Infill 20 % 42 %

    General Comments

    Characteristics

    • Semi-Flexible
    • Impact Resistant
    • Fatigue Resistant
    • Does not shrink as much as traditional nylons
    • Extrudes at a much lower temperature than other nylons
    • Chemical resistance, durability

    Applications

    • Aerospace applications
    • Chemical resistant equipment cover
    • Industrial parts currently being made of other high tensile polymers
    • Large motor mounting
    • Industrial vibration isolators and damping parts
    • High pressure sand blasting resistant
    • Sand blast masking
    • Electroplating supports and hangars
    • Chemical dip and tank supports
    • High end gears and cam

    Considerations

    • Moisture can play a big part in shrinkage. Less moisture = less shrinkage.

    Printing Skill & Experience - Advanced

    • Part Warpage – Use brim and N1 support material to minimize the part warpage.