At some point, ProtoTRAK owners may need to find the model and serial numbers of their machines for maintenance or repair purposes. You'll need to have these numbers handy if you plan to have us or your local distributor do the work. Use the information on this page to find the identification plates for knee mills, knee mill retrofits, bed mills, lathes, and production machines such as the LPM and 2op VMCs.

You can request on-site service, or if you plan to do the work yourself, you can buy replacement parts for all TRAK and ProtoTRAK equipment from our service parts website.


TRAK® Knee Mills

Models: K Series, Sport Series

On TRAK knee mills, the serial number plate is located on the right side of the machine below the ram, between the table and the electrical box.

 

TRAK® Bed Mills

Models: DPM, DPMRX, DPMV, FHM, Sport, and TRM Series, QuickCell QCM-1

On TRAK bed mills, the serial number plate is located on the right side of the machine, on the machine base, between the table and the electrical box. On FHM5 and FHM7 bed mills the serial number plate is on the right side of the machine, on the column, between the table and the electrical box.

 

TRAK® Lathes

Models: TRL Series, Sport Series

On TRAK toolroom lathes, the serial number plate is located on the right side of the machine near the tailstock.

 

TRAK® LPM Vertical Machining Center

On TRAK LPM Vertical Machining Centers, the serial number plate is located on the rear of the machine at the bottom of the electrical cabinet.

Note: Some earlier models have serial number plates attached to the left side (facing the control) toward the bottom of the machine.

 

TRAK® 2op Vertical Machining Center

Models: M10, M11

On TRAK 2op Vertical Machining Centers, the serial number is located on the rear of the machine on the electrical cabinet door.

Note: Some earlier models have serial number plates attached to the right side (facing the control) on the center of the machine.

 

ProtoTRAK® Retrofits

Models: Edge, M2, M3, EMX

On these models the serial number plate is located behind the control on the pendant arm.

Models: ProtoTRAK, ProtoTRAK Plus

On these models the serial number plate is located on the side of the lower black box where the motor cables are attached.

Models: MX2, MX3, AGE 2, AGE 3, SM 2, SM 3, SMX 2, SMX 3, KMX 2, KMX 3

On these models the serial number plate is located on the side of the lower black box where the motor cables are attached (on the computer cabinet).