ProtoTRAK SLX

Advanced capability, refined user interface

 

 

  • Advanced capability
  • Easy transition between manual and CNC
  • Always easy to learn and use – even the most advanced operations
  • Configure the control to your needs



ProtoTRAK SLX is used on
TRAK TRL Lathes

 

Best for these situations:
From “manual” work to parts with of moderate complexity (blended profiles)
Users will work on the same machine frequently
Prototypes to small batch production
Productivity and continuous improvement are key objectives

 

Powerful Capability

Some features are optional - check the specifications

 

Cycle
Just Program the Part Geometry and Leave
the Tool Path to Cycle

With most CNCs you must define your part in terms
of tool path. But with the powerful cycle capability of
ProtoTRAK lathe CNCs, you simply define your part
geometry and the dimensions of your stock. The tool
path is generated automatically.

Just a few simple inputs in the powerful Cycle event...

...and the hard work of defining the tool path is done
for you automatically.

 

Tool Path Graphics
The ProtoTRAK relieves you from the chore of programming the tool path, but you will still be interested in seeing where the control is planning to move the tool. Colors, error messages and selectable views make it easy to check your program before you machine.

 

Easy, Convenient Lathe Tool Setting
Accurate tool setting is easy. Tool data may be saved for use on different programs and even applied to manual work in the DRO mode.

List-Step Graphics
With a single button push, you can look at a full screen view of what you have programmed so far. From there, you can use the list step graphics to isolate program problems.


Run-Time Clock
In the run mode, the ProtoTRAK will display the time remaining until the next time the control is programmed to stop for a tool change. You know how long it will be before the job will need attention from you.

Tooling Choices (Turning)
The ProtoTRAK can be easily programmed to utilize manual or automatic tool changes

Single - manual changes
Gang - set up and run jobs with gang tooling
Indexer - choose between option 4- or 8-station

Spreadsheet Editing

View data for your whole program all at once. Sort and make changes to whole groups of events with one press of a button. This is much more convenient than either moving through your program one event at a time or picking through a long list of G Codes.

Advanced File Management
The ProtoTRAK borrows the Windows® functionality and adds a couple of clever twists. File management is enhanced by the ability to access different drives, copy and rename files and look at the part graphics before opening the file. Backing up part programs is easy with the automatic back up routine.

Networking
The ProtoTRAK may be networked with other ProtoTRAKs or with a server. This allows you to file, share or back-up programs right from your machine. Centralized file management helps assure revision control. Efficient file-sharing allows collaboration without time spent communicating between departments.

 

Control Hardware
Two-axis CNC, Two-axis DRO
Electronic handwheels for manual operation
10.4" color active-matrix screen
Industrial-grade Pentium® processor
512 MB Ram
4 USB connectors
RJ45 port and Ethernet card (O)
Override of program feedrate
Override of program spindle speed
LED status lights built into display
Gasket-sealed enclosures
Jogstick for convenient jog
USB thumb drive flash memory 512 MB or more
Uncluttered front panel with few hard keys

Software Features – General Operation
Clear, uncluttered screen display
Prompted data inputs
English language – no codes
Soft keys - change within context
Windows® operating system
Color graphics with adjustable views
Inch/mm selectable
Convenient modes of operation (see below)

DRO Mode Features for Manual Machining
Incremental and absolute dimensions
Powerfeed X or Z
Tapers of any angle
Radius
Fillet
Go To dimensions (O)
Servo motor return to Home
Spindle speed setting with override
Tool offsets from library
Fine/Course handwheel resolution
Thread repair (O)

Program Mode Features
Geometry-based programming
Event comments (O)
Incremental and absolute dimensions
Automatic tool nose radius compensation
Circular interpolation
Linear interpolation
Look –graphics with a single button push
List step – graphics with programmed events
displayed
Alphanumeric program names

Canned cycles:

  • Position
  • Drill
  • Bore
  • Turn
  • Arc
  • Cycle
  • Thread
  • Groove
  • Custom thread (O)
  • Tap (O)

Conrad – one input for automatic corner radius programming
Chamfer – one input for automatic chamfer programming
Math Helps with graphical interface
Auto load of math solutions
Subroutine repeat of programmed events
Nesting
Programmable spindle speeds
CSS (Constant Surface Speed) (O)
IPR (Inch per Revolution) programming (O)
Gang Tooling (O)

Edit Mode Features
Clipboard to copy events to another
program (O)
Spreadsheet editing (O)
Global data change (O)

Set Up Mode Features
Program diagnostics
Advanced tool library
Tool library file save
Icon-prompted tool setting
Tool offsets with modifiers
Single tool set-up
Gang tool set-up (O)
Indexer tool set-up (O)
Advanced diagnostic routines
Software travel limits
Tool path graphics with adjustable views

Model tool path verification (O)
Program run time estimation clock (O)

Run Mode Features
CAM file program run
Automatic coolant on/off
Real time run graphics with tool icon
Countdown clock to next pause or tool change (O)
TRAKing of programs during program run (O)
Automatic indexing for tool change (O)
Gang Tool Operation (O)

Program In/Out Mode Features
Simple program storage to floppy
CAM IN program converter
CAM OUT converter to run ProtoTRAK programs on different controls (O)
Converter for prior-generation ProtoTRAKprograms
DXF / DWG Converter (O)
Selection of file storage locations
Automatic file back up routine
Preview Graphics for unopened files
Networking via RJ45 port (O)

 

(O) - Option

Advanced Features with Verify Option
Verify

CSS (Constant Surface Speed) programming
IPR (Inch per Revolution) programming
Spreadsheet editing
Global data change
Clipboard to copy events to another program
Event comments
Program run time estimation clock
Additional Canned Cycles:

  • Custom thread
  • Tap
  • Thread repair

Networking Option
Networking via RJ45 port

TRAKing Option
TRAKing of programs during program run
Go To Dimensions

DXF File Converter
Import and convert CAD data into ProtoTRAK programs
DXF or DWG files
Chaining
Automatic Gap Closing
Layer control
Easy, prompted process you can do right at the machine

 

Parasolid File Converter
Import and convert Parasolid 3D CAD files into ProtoTRAK programs
Intuitive 3D model
Interactive, prompted selection of geometry

Event groups
Chaining