TRAK TRL 1630SX

1630SX Machine Specifications

• Height of Centers-8"
• Distance between centers-30"
• Swing over bed -16"
• Swing over saddle wings-16"
• Swing over cross slide-8.6"
• Cross slide travel-8.5"
• Tool section max 3 /4"
• Coolant tank capacity- 9.3 gal.
• Width of Bed-12.6"
• Height of Bed-12.6"
• Spindle Nose (Camlock)-D1-6
• Spindle through hole-2.12"
• Spindle taper-MT#6
• Taper in reduction sleeve -N/A
• Spindle dia at front bearing-3.15"
• Number of bearings-2
• Bearing class (radial round)-P5
• Spindle speed range (RPM)-150-2500
• Optional Tailstock Quill travel-6.3"
    - Quill diameter-2.36"
    - Quill taper hole-MT#4
• Spindle Motor HP -7.5
• Power requirements, control-110V; 1P; 8 A
• Power requirements, machine-220V;3P;60Hz
• Amps full load current-25
• Dimensions net - 83 x 40 x 56"
• Dimensions shipping - 87 x 45 x 67"
• Weight net - 2,200 lbs.
• Weight shipping - 2,750 lbs.
• Maximum rapid feed X - 100
• Maximum rapid feed Z - 150
• Coolant pump motor -1/8 HP
• Spindle motor brake - Dynamic braking
• Way surface hardness - 400 - 450 HB
• Head stock lubrication - Oil bath
• Sliding door for easy set-ups
• Bedways hardened and ground
• Sliding surfaces Turcite coated
• Dovetails on cross slide, V-ways on saddle
• Adjustable saddle gibs

Machine Options

• Advanced features - lathe
• Chuck
• Collet closer
• Coolant pump
• DXF file converter
• Face plate
• Follow rest
• Indexer - 4 or 8-station
• Networking/Memory
• Remote stop/go switch
• Steady rest
• Tailstock
• Tooling kit
• TRAKing
• Work lamp