TRAK Bed Mill Specifications

 
TRAK RX2 Bed Mill
RX2
TRAK RX3 Bed Mill
RX3
TRAK RX5 Bed Mill
RX5
TRAK RX7 Bed Mill
RX7
ProtoTRAK CNC Model RMX RMX RMX RMX
Table Size 49″ x 9″ 50″ x 10″ 50″ x 12″ 76″ x 14″
T-Slots (Number x Width) 3 x .63″ x 2.5″ 3 x .63″ x 2.48″ 3 x .63″ x 2.52″ 4 x .63″ x 2.5″
Travel (X, Y, Z Axis)* 31.75″ x 16″ x 25.5″ Note 31.5″ x 17″ x 25.81″ 40″ x 20″ x 25.81″ 60″ x 23″ x 24.25″
Quill Diameter 3 3/8″ 3 15/16″ 3 15/16″ 4.56″
Maximum Quill Travel 5″ 5″ 5″ 5.5″
Spindle Taper R8 40 Taper 40 Taper 40 Taper
Spindle Speed Range RPM 40 - 600, 300 - 5000 40 - 600, 300 - 5000 40 - 600, 300 - 5000 40 - 600, 300 - 5000
Spindle Center to Column Face 18.5″ 20.5″ 20.5″ 24″
Head Swivel (side to side) +/- 90° +/- 90° +/- 90° +30° CW and -90° CCW Note
Quill Feeds per Revolution of Spindle 0.0015/0.003/0.006″ 0.0015/0.003/0.006″ 0.0015/0.003/0.006″ 0.0015/0.003/0.006″
Spindle Motor HP 3 HP 5 HP 5 HP 7.5 HP
Power Requirements 200-240V, 3P, 27A 200-240V, 3P, 35A 200-240V, 3P, 35A 200-240V, 3P, 42A
Maximum Weight of Workpiece 1320 lbs 1320 lbs 1760 lbs 2200 lbs
Height Of Table From Bottom Of Bed 36.75″ 36.75″ 40″ 38.75″
Max Spindle Nose To Table 25.5″ 25.81″ 25.81″ 24.25″
Min Height 86.625″ 87.5″ 87.5″ 87.875″
Max Height 98.75″ 100.5″ 102″ 105″
Width Of Machine Including Table 71.25″ 73.5″ 94.13″ 110″
Overall Length With Electric Door Closed 73.31″ 76.63″ 82.5″ 94.5″
Overall Length With Electrical Door Open 93.88″ 96.63″ 103″ 119″
Overall Width Inc Full Table Traverse 102.53″ 102.25″ 131.06″ 168.5″
Footprint Of Machine 23.13″ x 40.5″ 24″ x 43.31″ 24″ x 48.4″ 42.52″ x 63″
Weight Net / Shipping Lbs. 3200 / 3500 4100 / 4400 4400 / 4700 7480 / 7700
Rapid Traverse X, Y, Z Mechanical Handwheels: 250 IPM on X, Y and Z
Electronic Handwheels: 400 IPM on X and Y, 250 IPM on Z
Mechanical Handwheels: 250 IPM on X, Y and Z
Electronic Handwheels: 400 IPM on X and Y, 250 IPM on Z
400 IPM on X and Y, 250 IPM on Z 400 IPM on X and Y, 250 IPM on Z
Coolant Reservoir Capacity 10 gallons 10 gallons 10 gallons 15 gallons
Drilling Max Capacity (diameter) 1″ dia. 1″ dia. 1″ dia. 1″ dia.
Milling Max Capacity 3 inch³/min 5 inch³/min 5 inch³/min 7 inch³/min
Tapping Max Capacity ¾ - 10 1 - 8 1 - 8 1 - 8
* For DPM RX2 - the Electronic Handwheel option will reduce the x travel to 30.5″. ** Head swivel is limited to approximately 30° in the clockwise direction due to the pendant arm extension bracket.