TRL 3075RX Toolroom Lathe

TRL 3075RX Toolroom Lathe with the ProtoTRAK RLX CNC

TRAK TRL 3075RX Specifications:

  • 30″ swing, 74.80″ between centers
  • Generous 6.69″ spindle through hole
  • 30 HP continuous spindle motor
  • High (aluminum) and low (steel) speed range settings

Standard Features:

  • ProtoTRAK RLX CNC integrated into the machine at the factory
  • Chip Conveyor
  • Manual or CNC operation
  • Electronic handwheels and jogstick
  • Brushless servo motors
  • Inverter-duty spindle drive
  • Programmable spindle speeds
  • Constant Surface Speed (CSS) Programming
  • Inch Per Revolution (IPR) Programming
  • Optional TRAKing® for manual control of CNC programs
  • Optional turret for automatic tool changes

Specifications All Machines

  1440EX 1630RX 1630HS-RX 1845RX 2470RX 3075RX 30120RX

ProtoTRAK CNC Model

ELX RLX RLX RLX RLX RLX RLX

Capacity

Height of Centers 7″ 8″ 8″ 9″ 12″ 15″ 16.5″
Distance between centers 40″ 30″ 30″ 45″ 70″ 74.80″ 118″
Swing over bed 14″ 16″ 16″ 18.1″ 24″ 30″ 33″
Swing Over Saddle Wings 14″ 16″ 16″ 17″ 24″ 28″ 33″
Swing Over Cross Slide 7″ 8.6″ 8.6″ 9.13″ 14.5″ 19″ 21.2″
Cross Slide Travel 8″ 8.5″ 8.5″ 10.6″ 12.5″ 16.1″ 20.5″
Tool Section Max 3/4″ 3/4″ 3/4″ 1″ 1″ 1.5″ 1.5″
Coolant Reservoir Capacity 3 gal 8 gal 8 gal 13 gal 15 gal 47 gal 48 gal
Oil Pump - Way Lubrication - 2 l 2 l 2 l 2 l 2.3 l 2 l
Head Stock Lubrication - 1.5 gal 1.5 gal 1.85 gal 5.3 gal
6.3 gal w/oil cooler option
6 gal 8.5 gal
Rapid Speeds 100 IPM on Z Axis
100 IPM on X Axis
400 IPM on Z Axis
200 IPM on X Axis
400 IPM on Z Axis
200 IPM on X Axis
400 IPM on Z Axis
200 IPM on X Axis
400 IPM on Z Axis
200 IPM on X Axis
400 IPM on Z Axis
200 IPM on X Axis
400 IPM on Z Axis
200 IPM on X Axis

Bed

Width Of Bed 8.1″ 12.6″ 12.6″ 13.4″ 14.57″ 18″ 19.69″
Height Of Bed 10.6″ 12.6″ 12.6″ 12.4″ 15″ 15.75″ 18.7″

Headstock

Spindle Nose D1-4 D1-6 A2-4 D1-6 D1-8 A2-11 A2-11
Spindle Through Hole 1.56″ 2.12″ 1.57″ 2.36″ 4.09″ 6.69″ 6.30″
Spindle Taper MT#5 MT#6 MT#5 MT#6 MT#8 Non MT taper MT#8
Taper In Reduction Sleeve 3 n/a n/a MT#4 MT#5 MT#6 MT#5
Spindle Dia At Front Bearing 2.36″ 3.15″ 2.56″ 3.35″ 5.51″ 8.66″ 7.87″
Number Of Bearings 2 2 5 2 2 2 2
Number of Speeds or Ranges 12 1 1 2 2 2 2
Spindle Speed Range RPM 60-2,400 150-2,500 150-4,000 80-850, 250-2,500 40-670, 100-1,800 30-300, 100-1,000 20-415, 40-1,300
Spindle ID Thread (end of spindle) n/a M56 x 2MM Pitch M56 x 2MM Pitch n/a n/a M185 x 3.0 n/a

Tailstock

Quill Travel 5″ 5.75″ 5.75″ 6″ 8.5″ 8″ 8″
Quill Diameter 1.575″ 2.36″ 2.36″ 2.56″ 3.5″ 4.875″ 4.13″
Quill Taper Hole MT#3 MT#4 MT#4 MT#4 MT#5 MT#6 MT#6

Spindle Motor

Horsepower 5 HP 7.5 HP 7.5 HP 10 HP 15 HP 30 HP 30 HP

Power Requirements - Machine

Voltage Control: 110V
Machine: 200V - 240V
200V to 240V 200V to 240V 200V to 240V 200V to 240V 480V +/- 10%
(432V to 528V)
480V +/- 10%
(432V to 528V)
Amps Full Load Current Control: 8A
Machine: 15A
44A 44A 54A 73A 71.6A 62A
Phase/Hz Control: 1/60
Machine: 3/60
3/60 3/60 3/60 3/60 3/60 3/60

Dimensions

Net (L x W x H), lbs. 73″ x 44″ x 57″
1,800 lbs
82″ x 45″ x 72″
2,750 lbs
82″ x 45″ x 72″
2,750 lbs
88″ x 55″ x 70″
3,285 lbs
129″ x 84″ x 79″
6,500 lbs
170″ x 82″ x 77″
15,430 lbs
212.6″ x 86.61″ x 79.53″
18,920 lbs
Shipping (L x W x H), lbs. 78″ x 49″ x 67″
2,200 lbs
87″ x 45″ x 70″
3,420 lbs
87″ x 45″ x 70″
3,420 lbs
91″ x 52″ x 79″
3,800 lbs
134″ x 65″ x 79″
6,900 lbs
225″ x 89″ x 88″
16,530 lbs
222.44″ x 90.55″ x 110.23″
19,270 lbs

Other

Coolant Pump Motor HP* 1/8 HP 1/8 HP 1/8 HP 1/8 HP 1/8 HP 3/4 HP 1/4 HP
Spindle Motor Brake Magnetic Dynamic Dynamic Dynamic Dynamic Dynamic Dynamic
Way Surface Hardness 400-450 HB 400-450 HB 400-450 HB 480-560 HB 480-560 HB 480-560 HB 480-560 HB
Head Stock Lubrication Splash Lube Oil Bath Grease Oil Bath Oil Bath Oil Bath Oil Bath

Options

Tooling Kit 3/4″ 3/4″ 3/4″ 3/4″ or 1″ 1″ 1-1/4″ 1-1/4″
Chuck 6″, D1-4 8″, D1-6 6″, A2-4 8″, D1-6 12″, D1-8 20″, A2-11 20″, A2-11
5C Collet Closer D1-4 D1-6 A2-4 D1-6 n/a n/a n/a
Turret Option n/a 3/4″, 8 Position
3/4″, 4 Position
3/4″, 8 Position
3/4″, 4 Position
3/4″ or 1″, 8 Position
3/4″ or 1″, 4 Position
1″, 8 Position
1″, 4 Position
1″, 8 Position 1″, 8 Position
* Coolant pumps are optional equipment.

Options

Machine Options

TRAKing<sup>®</sup> for RX Lathes

TRAKing® for RX Lathes

TRAKing of programs during program run, GO TO Dimension in DRO Mode.

VIDEO: TRAKing® Option Overview

Hydraulic Chuck - 3075RX

Hydraulic Chuck - 3075RX

18″ hydraulic chuck. Through hole: 6.1″

For the TRL 3075RX only.

Steady Rests - 3075 RX

Steady Rests - 3075 RX

There are two steady rest options available for the 3075RX:

Part Diameter Type
SR-3075RX SMALL 3″ to 8″ Roller
SR-3075RX BIG 7″ to 15″ Roller

These steady rests can be purchased as a set (SR-3075RX SET).

Rear Chuck & Adapter - 3075RX

Rear Chuck & Adapter - 3075RX

The rear chuck option includes a 20″ Buck® chuck, chuck adapter plate and a rear spindle adapter.

Both front and rear chucks are balanced at the factory when purchased with the machine. Chucks purchased separately may need to be balanced.

Buck Chuck

Buck Chuck

Direct mounting, featuring separate top jaws and master jaws. Chucks offered for each model are rated from the maximum RPM of the lathe.

Lathe Chuck Through Hole
1630RX 8″ D1-6 2.36″
1630HS-RX 6″ A2-4 1.77″
1845RX 8″ D1-6 2.36″
2470RX 12″ D1-8 4.16″
3075RX 20″ A2-11 7.48″
30120RX 20″ A2-11 7.48″
8 Station Turret for Long Travel Lathes

8 Station Turret for Long Travel Lathes

The 8-station turret for TRAK Long Travel Lathes uses 1″ tooling and supplies coolant at each tool. Clamping is accomplished through hydraulics.

Lathe Tooling
3075RX 1″
30120RX 1″

VIDEO: 8-Station Turret for TRAK® Long Travel Lathes

Tooling Kit

Tooling Kit

Dorian® brand tooling kits make tool changes quick and easy. Repeatable to .001″. The 1-1/4″ tooling kit for the 3075RX and 30120RX includes:

  • (1 ) Quick change tool post
  • (4) Square tool holders for turning, facing and boring
  • (1) Boring tool holder (1.50″)
  • (1) Morse taper holder (MT5)
  • (1) T-slot nut
Faceplate

Faceplate

Lathe Diameter
1440EX 10″
1630RX 14″
1630HS-RX 14″
1845RX 14″
2470RX 20″
3075RX 30″
30120RX 30″
Follow Rest

Follow Rest

Lathe Diameter Type
1440EX 1.97″ Solid Brass Nib
1630RX 5″ Solid Brass Nib
1630HS-RX 5″ Solid Brass Nib
1845RX 3.94″ Solid Brass Nib
2470RX 6.5″ Solid Brass Nib
3075RX 5.5″ Solid Brass Nib
30120RX 0.79 - 7.87″ Solid Brass Nib
Remote Stop/Go Switch

Remote Stop/Go Switch

A hand-held switch to stop and continue program run.

Available for purchase at our service parts website: Remote Stop/Go Switch

TRAK<sup>®</sup> USB Memory

TRAK® USB Memory

The USB Memory option consists of an industrial-grade Delkin® Thumb drive. This device is unsurpassed for reliability and speed of file access and is the storage of choice for our own software engineers.

VIDEO: TRAK® USB Memory Option Overview

Software Options

CAM File Out Converter

CAM File Out Converter

Write, save and then run programs with RX Canned Cycle Events on Legacy ProtoTRAK controls in either .CAM Events or .GCD format.

Auxiliary Output

Auxiliary Output

Programmable output signal.

Offline Programming

Offline Programming

  • ProtoTRAK RX user interface for Windows® PC
  • Program parts and simulate CNC Run
  • Modify files from current and former ProtoTRAK models

VIDEO: Installing ProtoTRAK Offline Software

DXF Converter

DXF Converter

  • Import and convert CAD data into ProtoTRAK programs
  • DXF or DWG files
  • Chaining
  • Automatic Gap Closing
  • Layer control
  • Part alignment
  • Feature analysis (circle/arc radius and position)
  • Simple CAD construction/editing tools
  • DXF-output capability
  • Easy, prompted process you can do right at the machine

Not available for the ProtoTRAK ELX.

Advanced Features

Advanced Features

  • Verify Make Part – solid model graphics of programmed toolpath
  • Event Comments
  • G-code editor
  • Thread Repair
  • Clipboard
  • Gang Tool setup
  • Custom Thread event
  • Tap event
  • Search Edit

Not available for the ProtoTRAK ELX.

MTConnect<sup>®</sup>

MTConnect®

The TRAK MTConnect option enables customers to add MTConnect functionality quickly and easily to their machines, so that machine data can be collected using the standard MTConnect protocol.

  • Machine networking through ethernet connection or USB Wi-Fi adapter
  • Collect machine data throughout shop
  • Monitor machine status, receive notifications and analyze data throughout your machines’ history

3rd party software not included.

VIDEO: MTConnect® Option Overview

Videos

TRAK RX Series Toolroom Lathes Overview featuring the TRL 1845RX
8-Station Turret for TRAK Long Travel Lathes
Installing ProtoTRAK Offline Software
Managing Files with the ProtoTRAK RX CNC
MTConnect Option for ProtoTRAK RX Series Machines

Other TRAK CNC Lathe Models:

TRAK TRL 1440EX Lathe
1440EX Features:
  • 14″ swing, 40″ btw. centers
  • Spindle through hole of 1.56″
  • 60-2400 RPM
  • ProtoTRAK ELX CNC
TRAK TRL 1630RX Lathe
1630RX Features:
  • 16″ swing, 30″ btw. centers
  • Spindle through hole of 2.12″
  • 150-2500 RPM
  • ProtoTRAK RLX CNC
TRAK TRL 1630HS-RX Lathe
1630HS-RX Features:
  • 16″ swing, 30″ btw. centers
  • Spindle through hole of 1.57″
  • 150-4000 RPM
  • ProtoTRAK RLX CNC
TRAK TRL 1845RX Lathe
1845RX Features:
  • 18″ swing, 45″ btw. centers
  • Spindle through hole of 2.36″
  • High & low speed ranges
  • ProtoTRAK RLX CNC
TRAK TRL 2470RX Lathe
2470RX Features:
  • 24″ swing, 70″ btw. centers
  • Spindle through hole of 4.09″
  • High & low speed ranges
  • ProtoTRAK RLX CNC
TRAK TRL 30120RX Lathe
30120RX Features:
  • 43.5″ swing over 15.5″ gap
  • Spindle through hole of 6.30″
  • High & low speed ranges
  • ProtoTRAK RLX CNC