Chip pan for TRAK knee mills.
Knee power feed for TRAK Knee mills.
A hand-held switch to stop and continue program run.
Available for purchase at our service parts website: Remote Stop/Go Switch
Table guard with sliding doors to impede chips and coolant and keep the operator from the tool and workpiece during CNC machining. Interlock switch on the door interfaces to the CNC. DRO and TRAKing are allowed with the door open, but the door must be closed for automatic CNC operations in the Program Run Mode.
Bright, long-lasting LED work lamp with industrial-grade mount.
Bright, long-lasting halogen work lamp with industrial-grade mount.
The auto lubrication pump for the ways and ballscrews is wired to operate while the spindle is running. Discharge times and intervals are set on the pump.
6″ Kurt vise and mounting hardware - model DX6. Opens to 9″.
The unique Fog Buster® non-fogging coolant sprayer precisely directs a fine stream of coolant to the tool and workpiece.
The feel of manual control of real handwheels, but our electronic handwheels bring the power of the CNC to your fingertips through features such as TRAKing and DO ONE. Not available for the ProtoTRAK EMX.
A Torque-Rite draw bar factory installed. May be ordered as CAT or NMTB/NST. Draw bar for CAT type is longer to fit into tool holders that have the tool changer grip, or retention knob removed.
A popular brand of glass scale mounted on the table and saddle. X/Y glass scales not available for the ProtoTRAK EMX.
The optional coolant pump is mounted on the back of the machine column. It is wired into the electrical panel for operation through the Accessory key on the CNC front panel.
Switches and brackets are set for maximum travel limits. Tripping the switch will cause the servo motors to shut down.
The USB Memory option consists of an industrial-grade Delkin® Thumb drive. This device is unsurpassed for reliability and speed of file access and is the storage of choice for our own software engineers.
Requires purchase of KMX Offline Programming.
Verify - Solid model representation of parts and toolpaths
DXF Converter
Parasolid File Converter
The Auxiliary functions provide program control of spray mist or coolant, spindle off, and interface to a programmable rotary table or indexer. Available only on K3KMX-3.
