Coolant pump may be configured to operate as commanded by the Accessory Key on the ProtoTRAK RLX front panel.
For RX series lathes: one tube-style lamp mounted to the underside of the chip enclosure, and one swing arm lamp mounted on top of lathe.
18″ hydraulic chuck. Through hole: 6.1″
For the TRL 3075RX only.
Direct mounting, featuring separate top jaws and master jaws. Chucks offered for each model are rated from the maximum RPM of the lathe.
| Lathe | Chuck | Through Hole |
|---|---|---|
| 1630RX | 8″ / D1-6 | 2.36″ |
| 1630HS-RX | 6″ / A2-4 | 1.77″ |
| 1845RX | 8″ / D1-6 | 2.36″ |
| 2470RX | 12″ / D1-8 | 4.16″ |
| 3060RX | 20″ / A2-11 | 7.48″ |
| 30120RX | 20″ / A2-11 | 7.48″ |
Optional 16″ rear chuck and chuck adapter for the 3060RX and 30120RX. Both front and rear chucks are balanced at the factory when purchased with the machine. Chucks purchased separately may need to be balanced.
For the TRL 3060RX and TRL 30120RX.
| Option | Description |
|---|---|
| Rear chuck & adapter | 16″ chuck |
| Adapter - rear chuck | Adds A2-11 spindle nose |
TRAK CNC turrets are designed, engineered and manufactured at our corporate headquarters in Southern California.
| Lathe | Tooling |
|---|---|
| 1630RX | 3/4″ |
| 1630HS-RX | 3/4″ |
| 1845RX | 3/4″ or 1″ |
| 2470RX | 1″ |
Coolant supplied at each tool. Not available for the 30120RX.
The 8-station turret for TRAK Long Travel Lathes uses 1″ tooling and supplies coolant at each tool. Clamping is accomplished through hydraulics.
| Lathe | Tooling |
|---|---|
| 3060RX | 1″ |
| 30120RX | 1″ |
TRAK CNC turrets are designed, engineered and manufactured at our corporate headquarters in Southern California.
| Lathe | Tooling |
|---|---|
| 1630RX | 3/4″ |
| 1630HS-RX | 3/4″ |
| 1845RX | 3/4″ or 1″ |
| 2470RX | 1″ |
NOW AVAILABLE: Optional boring bar/drill holder kits are available for the 4 station turret for either 3/4″ or 1″ tooling.
The 4-station turret is not available for the 30120RX.
VIDEO: TRAK® Turrets Overview
VIDEO: 4 Station Turret Inspection
Optional on 1630RX and 1630HS-RX lathes. Standard on all other models.
Dorian® tooling kits make tool changes quick and easy. Repeatable to .001″. The kits include:
| Lathe | Tooling |
|---|---|
| 1630RX | 3/4″ |
| 1630HS-RX | 3/4″ |
| 1845RX | 3/4″ or 1″ |
| 2470RX | 1″ |
| 30120RX | 1-1/4″ |
5C Collet Closer with extended taper mount nosepiece.
Not available for 2470RX or 30120RX.
Dorian® brand tooling kits make tool changes quick and easy. Repeatable to .001″. The 1‑1/4″ tooling kit for the 3060RX and 30120RX includes:
TRAK offers a hinged belt-style chip conveyor for the TRL 30120RX. The conveyor receives power directly from the lathe and is controlled by the operator with a switch on the pendant.
TRAK offers a hinged belt-style chip conveyor for the TRL 3060RX. The conveyor receives power directly from the lathe and is controlled by the operator with a switch on the pendant.
| Lathe | Diameter |
|---|---|
| 1630RX | 14″ |
| 1630HS-RX | 14″ |
| 1845RX | 14″ |
| 2470RX | 20″ |
| 3060RX | 30″ |
| 30120RX | 30″ |
| Lathe | Diameter | Type |
|---|---|---|
| 1630RX | 5″ | Solid Brass Nib |
| 1630HS-RX | 5″ | Solid Brass Nib |
| 1845RX | 3.94″ | Solid Brass Nib |
| 2470RX | 6.5″ | Solid Brass Nib |
| 3060RX | 0.79 - 7.87″ | Solid Brass Nib |
| 30120RX | 0.79 - 7.87″ | Solid Brass Nib |
| Lathe | Diameter | Type |
|---|---|---|
| 1630RX | .500 to 5.5″ | Roller |
| 1630HS-RX | .500 to 5.5″ | Roller |
| 1845RX | 0.4 to 7.87″ | Roller |
| 2470RX | 1.5 to 8″ | Roller |
| Lathe | Diameter | Type |
|---|---|---|
| 3060RX | 1.18 to 11.02″ 10.43 to 21.65″ |
Roller |
| 30120RX | 1.18 to 11.02″ 10.43 to 21.65″ |
Roller |
Comes with 2 sets of fingers.
A hand-held switch to stop and continue program run.
Switches and brackets are set for maximum travel limits. Tripping the switch will cause the servo motors to shut down.
The USB Memory option consists of an industrial-grade Delkin® Thumb drive. This device is unsurpassed for reliability and speed of file access and is the storage of choice for our own software engineers.
TRAK offers a 2 year extended warranty for this product.
TRAKing of programs during program run, GO TO Dimension in DRO Mode.
Write, save and then run programs with RX Canned Cycle Events on Legacy ProtoTRAK controls in either .CAM Events or .GCD format.
Programmable output signal.
The TRAK MTConnect option enables customers to add MTConnect functionality quickly and easily to their machines, so that machine data can be collected using the standard MTConnect protocol.
3rd party software not included.
