|Table size||49″ x 9″||50″ x 10″||50″ x 12″||76″ x 14″|
|T-slots (number x width x pitch)||3 x .63″ x 2.5″||3 x .63″ x 2.48″||3 x .63″ x 2.52″||4 x .63″ x 2.5″|
|Travel (X, Y, Z axis)*||31.75″ x 16″ x 25.5″||31.5″ x 17″ x 25.81″||40″ x 20″ x 25.81″||60″ x 23″ x 24.25″|
|Quill diameter||3 3/8″||3 15/16″||3 15/16″||4.56″|
|Maximum quill travel||5″||5″||5″||5.5″|
|Spindle taper||R8||CAT 40/NMTB 40/BT 40||CAT 40/NMTB 40/BT 40||CAT 40/NMTB 40/BT 40|
|Spindle speed range RPM||40 - 600, 300 - 5000||40 - 600, 300 - 5000||40 - 600, 300 - 5000||40 - 600, 300 - 5000|
|Spindle center to column face||18.5″||20.5″||20″||24″|
|Spindle motor HP (vari-speed head)||3 HP||5 HP||5 HP||7.5 HP|
|Power requirements - machine/control||220V, 3P, 27 Amp||220V, 3P, 35 Amp||220V, 3P, 35 Amp||220V, 3P, 42 Amp|
|Maximum weight of workpiece||1320 lbs.||1320 lbs.||1760 lbs.||2200 lbs.|
|Height of table from bottom of bed||36.75″||36.75″||40″||38.75″|
|Max spindle nose to table||25.5″||25.75″||25.75″||24.25″|
|Width of machine including table||71.25″||73.5″||94.25″||110″|
|Length with electrical door closed||73.3″||76.65″||82.5″||94.5″|
|Length with electrical door open||93.9″||96.75″||103″||119.5″|
|Overall width incl full table traverse||103″||103″||132″||168.5″|
|Footprint of machine||23.5″ x 40.5″||24″ x 44″||24″ x 48.4″||42.52″ x 63″|
|Weight net / shipping lbs.||3200 / 3500||4100 / 4400||4400/ 4600||7480 / 7700|
|Rapid traverse X, Y, Z||250 IPM on X, Y and Z with Mechanical Handwheels, 400 IPM on X and Y, 250 IPM on Z with electronic handwheels||250 IPM on X, Y and Z with Mechanical Handwheels, 400 IPM on X and Y, 250 IPM on Z with electronic handwheels||400 IPM on X and Y, 250 IPM on Z||400 IPM on X and Y, 250 IPM on Z|
|Coolant capacity||10 gallons||10 gallons||10 gallons||10 gallons|
|Drilling max capacity in mild steel||1″ dia.||1″ dia.||1″ dia.||1″ dia.|
|Milling max capacity in mild steel||3 inch³/min||3 inch³/min||5 inch³/min||7 inch³/min|
|Tapping max capacity in mild steel||¾ - 10″||¾ - 10″||1-8″||1-8″|
*For DPM RX2 - the Electronic Handwheel option will reduce the x travel to 30.5″.
The feel of manual control of real handwheels, but our electronic handwheels bring the power of the CNC to your fingertips through features such as TRAKing and DO ONE. Standard for TRAK DPM RX5 and TRAK DPM RX7.
Model DX6 6’ Kurt vise and mounting hardware.
A Torque-Rite draw bar factory installed. May be ordered as CAT or NMTB/NST. Draw bar for CAT type is longer to fit into tool holders that have the tool changer grip, or retention knob removed.
The non-fogging coolant sprayer directs a fine stream of coolant to the tool and workpiece.
Convenient light with bright, long-lasting LED bulb.
Combines a chip pan mounted to the bed and splash shields mounted to the right and left of the column. Available factory installed only – not available after shipment.
A glass scale mounted on the table and saddle.
A hand-held switch to stop and continue program run.
Provides an enclosed work-space mounted on the table. The sliding door is switched to prevent operation of CNC Run with door open.
Switches and brackets to set maximum travel limits. Tripping the switch will cause servo motors to shut down.
Try the ProtoTRAK RMX for yourself. Schedule time to play with it at one of our showroom locations, or have a sales rep bring one to you!