TRL 1440EX Toolroom Lathe

Specifications
Options

Specifications

	1440EX	1630RX	1630HS-RX	1845RX	2470RX	30120RX
Modelo del Controlador ProtoTRAK CNC	ELX	RLX	RLX	RLX	RLX	RLX
Capacidad
Altura de Centros	7″	8″	8″	9″	12″	16.5″
Distancia Entre los Centros	40″	30″	30″	45″	70″	118″
Diámetro Admitido Sobre las Guías de la Bancada	14″	16″	16″	18.1″	24″	33″
Diám. Admitido Sobre las Alas del Carro Transversal	14″	16″	16″	17″	24″	33″
Diámetro Admitido Sobre el Carro Transversal	7″	8.6″	8.6″	9.13″	14.5″	21.2″
Desplazamiento del Carro Transversal	8″	8.5″	8.5″	10.6″	12.5″	20.5″
Altura Máxima Permitida de la Herramienta	3/4″	3/4″	3/4″	1″	1″	1.5″
Capacidad Máxima del Tanque de Refrigerante	3 gal.	8 gal.	8 gal.	13 gal.	15 gal.	48 gal.
Bomba del Lubricación de las Guías		2 Liter	2 Liter	2 Liter	2 Liter	2 Liter
Lubricación de la Transmición (Caja de Engranes)		1.5 gal.	1.5 gal.	1.85 gal.	5.3 gal. 6.3 gal. w/oil cooler option	10 gal.
Velocidad de Avance Rápido	100 ipm on Z Axis 100 ipm on X Axis	400 ipm on Z Axis 200 ipm on X Axis	400 ipm on Z Axis 200 ipm on X Axis	400 ipm on Z Axis 200 ipm on X Axis	400 ipm on Z Axis 200 ipm on X Axis	400 ipm on Z Axis 200 ipm on X Axis
La Bancada
Ancho de la Bancada	8.1″	12.6″	12.6″	13.4″	14.57″	19.69″
Altura de la Bancada	10.6″	12.6″	12.6″	12.4″	15″	34.44″
Transmición
Nariz del Husillo (Sujecion del Mandril (Chuck))	D1-4	D1-6	A2-4	D1-6	D1-8	A2-11
Diámetro de Paso de Barra A Través del Husillo	1.56″	2.12″	1.57″	2.36″	4.09″	6.30″
Conicidad del Portaherramientas	MT#5	MT#6	MT#5	MT#6	MT#8	Non MT taper
Conicidad en el Adaptador de Reducción	3	n/a	n/a	MT#4	MT#5	MT#6
Diámetro del Husillo en el Balero Delantero	2.36″	3.15″	2.56″	3.35″	5.51″	7.87″
Número de Baleros	2	2	5	2	2	2
Número de Velocidades	12	1	1	2	2	2
Velocidad del Husillo - Vari-Speed (RPM)	60-2,400	150-2,500	150-4,000	80-850, 250-2,500	40-670, 100-1,800	20-415, 40-1,300
Spindle ID Thread (end of spindle)		M56 x 2MM Pitch	M56 x 2MM Pitch	n/a	n/a	M185 x 3.0
Contracabezal (Contrapunto)
Desplazamiento del Vastago del Contracabezal	5″	5.75″	5.75″	6″	8.5″	8″
Diámetro de la Caña o Boquilla del Husillo	1.575″	2.36″	2.36″	2.56″	3.5″	4.13″
Conicidad del Vastado del Contracabezal	MT#3	MT#4	MT#4	MT#4	MT#5	MT#6
Motor del Husillo
Potencia del Motor	5 HP	7.5 HP	7.5 HP	10 HP	15 HP	30 HP
Requerimientos Eléctricos - Máquina
Tensión de entrada	Control: 110V Machine: 220V	200V to 240V	200V to 240V	200V to 240V	200V to 240V	480V
Corriente de Carga Completa (FLC)	Control: 8A Machine Full Load: 15A	44A	44A	54A	75A	62A
Fase/Hz	Control: 1/60 Machine: 3/60	3/60	3/60	3/60	3/60	3/60
Dimensiones
Dimensiones Netas (Largo x Ancho x Alto), lbs.	73″ x 44″ x 57″ 1,800 lbs.	82″ x 45″ x 72″ 2,750 lbs.	82″ x 45″ x 72″ 2,750 lbs.	88″ x 55″ x 70″ 3,285 lbs.	129″ x 84″ x 79″ 6,500 lbs.	212.6″ x 86.61″ x 79.53″ 18,920 lbs.
Dimensiones de Envío (Largo x Ancho x Alto), lbs.	78″ x 49″ x 67″ 2,200 lbs.	87″ x 45″ x 70″ 3,420 lbs.	87″ x 45″ x 70″ 3,420 lbs.	91″ x 52″ x 79″ 3,800 lbs.	134″ x 65″ x 79″ 6,900 lbs.	222.44″ x 90.55″ x 110.23″ 19,270 lbs.
Otro
Motor de la Bomba del Refrigerante (HP)	1/8 HP	1/8 HP	1/8 HP	1/8 HP	1/8 HP	1/2 HP
Tipo de Freno del Motor del Husillo	Magnetic	Dynamic	Dynamic	Dynamic	Dynamic	Dynamic
Dureza de la Superficie de las Guías	400-450 HB	400-450 HB	480-560 HB	n/a	n/a	480-560 HB
Lubricación de la Transmición (Caja de Engranes)	Splash Lube	Oil Bath	Grease	Oil Bath	Oil Bath	Oil Bath
Opciones
Herramientas de Fabricación	3/4″	3/4″	3/4″	3/4″ or 1″	1″	1-1/4″
Sujecion del Mandril	6″, D1-4	8″, D1-6	6″, A2-4	8″, D1-6	12″, D1-8	20″, A2-11
5C Collet Closer	D1-4	D1-6	A2-4	D1-6	n/a	n/a
Opción Fresadora de Torreta	n/a	3/4″, 8 Position 3/4″, 4 Position	3/4″, 8 Position 3/4″, 4 Position	3/4″ or 1″, 8 Position 3/4″ or 1″, 4 Position	1″, 8 Position 1″, 4 Position	n/a

TRAK^® CNC Turrets — All New Designs

Factory-direct support. Easy programming for automatic tool changes.

TRAK^® 8-Station CNC Turret

Coolant supplied at each tool. Includes 2 ea. boring bar holders standard.

Lathe	Tooling
1630RX	3/4″
1630HS-RX	3/4″
1845RX	3/4″ or 1″
2470RX	1″

TRAK^® 4-Station CNC Turret

Lathe	Tooling
1630RX	3/4″
1630HS-RX	3/4″
1845RX	3/4″ or 1″
2470RX	1″

Options

Buck^® Chuck

Direct mounting, featuring separate top jaws and master jaws. Chucks offered for each model are rated from the maximum RPM of the lathe.

Lathe	Chuck	Through Hole
1440 EX	6″ D1-4	1.57″
1630RX	8″ D1-6	2.36″
1630HS-RX	6″ A2-4	1.77″
1845RX	8″ D1-6	2.36″
2470RX	12″ D1-8	4.16″
30120RX	20″ A2-11	6.30″

Tailstock

Optional on 1630RX and 1630HS-RX lathes. Standard on all other models.

Tooling Kit

Dorian^® brand tooling kits make tool changes quick and easy. Repeatable to .001″. The kits include:

1 quick change tool post
4 each 3/4″ or 1″ square tool holders for turning, facing and boring
1 boring tool holder (for the 3/4″ kit: 1″ holder; for the 1″ kit: 1.25″ holder)

Lathe	Tooling
1440EX	3/4″
1630RX	3/4″
1630HS-RX	3/4″
1845RX	3/4″ or 1″
2470RX	1″
30120RX	1-1/4″

Follow Rest

Lathe	Diameter	Type
1440EX	1.97″	Solid brass nib
1630RX	5″	Solid brass nib
1630HS-RX	5″	Solid brass nib
1845RX	3.94″	Solid brass nib
2470RX	6.5″	Solid brass nib
30120RX	0.79 - 7.87″	Roller

Steady Rest

Lathe	Diameter	Type
1440EX	.20 to 2.36″	Roller
1630RX	.500 to 5.5″	Roller
1630HS-RX	.500 to 5.5″	Roller
1845RX	0.4 to 7.87″	Roller
2470RX	1.5 to 8″	Roller
30120RX*	1.18 to 11.02″ 10.43 to 21.65″	Roller

* The 30120RX comes with 2 sets of fingers.

Faceplate

Lathe	Diameter
1440EX	10″
1630RX	14″
1630HS-RX	14″
1845RX	14″
2470RX	20″
30120RX	30″

Remote Stop/Go Switch

A hand-held switch to stop and continue program run.

Other Options Include:

5C Collet Closer - with extended taper mount nosepiece (not available for 2470RX or 30120RX)
Coolant Pump - may be configured to operate as commanded by the Accessory Key on the ProtoTRAK RLX front panel. 1440EX coolant pump turned on and off by switch on apron.
Work Lamp - mounts to the underside of the chip enclosure.